Glass cell and plastic cell for universal test components UTC
The Rectangular cuvette or glass cell is suitable for TS and YS series instruments, with a 10mm optical path and a single-sided wall thickness of 2mm. The external dimensions of length, width, and height are 55x14x54mm
![GLASS CELL](/inc/uploads/ckeditor/20211203182020660.jpg)
Square cuvette suitable for NH series, 50mm optical path, single-sided wall thickness of 2mm, external dimensions of length, width, and height: 54x54x55mm
![glass cell](/inc/uploads/ckeditor/20211203182059166.jpg)
Circular colorimetric dish for NS series, external dimensions: diameter 36mm/60mm
![](/inc/uploads/ckeditor/20211203182127662.jpg)
Precautions for using colorimetric dishes:
1. When taking a colorimetric dish, only touch both sides with your fingers to avoid contact with the optical surface. At the same time, pay attention to handling with care to prevent the influence of external forces on the color dishes, which may cause stress and damage.
2. Any solution containing substances that corrode glass shall not be stored in a colorimetric dish for a long time.
3. Do not place the colorimetric dish on a flame or electric stove for heating or baking in a drying oven;.
4. When contamination is found inside the colorimetric dish, use a specialized cleaning agent or anhydrous ethanol to clean it and wipe it clean in a timely manner.
5. Do not allow the transparent surface of the colorimetric dish to come into contact with hard or dirty objects. When containing the solution, a height of 2/3 of the colorimetric dish is sufficient. If there is any residue on the optical surface, it can be gently adsorbed with filter paper first, and then wiped with lens paper or silk.